Tech NewsComputerHow to

How to I Connect the Canon Pixma Ip110 Setup?

Canon Pixma IP110 is a slick multi-function printer that allows people to use computers without wire. In order to make the most of its excellent print quality, first, you need to set up your printer correctly. It is, therefore, crucial to be aware of the Canon Ip110 wireless setup process.

The most straightforward method to configure your Canon Ip110 set-up WiFi network is by using this WPS connecting method. There are a variety of conditions to be considered before implementing settings measures. They are listed below:

  • The router must be equipped with the WPS switch.
  • The network should be required to adhere to WAP security protocol. WAP Security protocol.

You can then perform the following:

  • The first step is to check whether the printer is powered on.
  • Hold and press the switch wireless for a few minutes until the power indicator’s white with light.
  • Click for the WPS, turn on the router, and expect to wait for approximately 2 minutes.

The printer device will begin to search for an available WiFi network. Once it has found one, you will see the blue WiFi indicator is flashing. If the Canon printer connects successfully to the community of senders, the white and blue indicator will stop blinking and stay lit.

Bluetooth Setup Configuration for Canon Ip110 Setup:

Now, you must confirm that the printer is successfully joined onto the Bluetooth network. To confirm this, print the printer’s settings (if you wish). Below are steps you need to follow to get this information:

Read Also :   Top 12 Best Connectify Alternatives For Windows PC in 2022

Make sure you press to activate the “Resume / Cancel” switch and hold it until the indicator light on the power switch is blinking six times.

Read Also : 8 Best ClipConverter Alternatives Websites You Can Use in 2022

After that, you’ll be able to determine that the page on network information will be displayed. Then verify that “Link” suggests “Active”, and you will see that SSID Service Set ID shows the correct sender community ID. The next step is to install on the Canon IP110 printer driver and (App) application. If you don’t own the setup CD included with the printer, you can download it directly from the official Canon printer site.

How do I install the driver and software with CD-ROM?

In order to establish this procedure, follow the steps listed below:

First step:

Then, insert the CD into your computer’s CD-ROM drive and tell the computer to establish the drive. Do a double-click “MSETUP4.EXE”.

Step 2.

If the first screen to begin is displayed, click Next. Select ” Wireless LAN connection” as the connection type and press Next.

Step 3.

Check that the IP110 printer is running and the power-on light is on. Then click Next. The program will locate a network that is available for the device. Be sure there is a “Printer settings cannot be found in the list” Select is selected, then click/push Next.

Step 4.

The installation process begins now in the installation Guide. Then, press the switch that follows to proceed.

If you see the “Connect through Wire-Free Configuration” screen appear, press to hold on the WiFi switch of the printer until the light on the power indicator blinks twice. Select Next.

Read Also :   How to find profiles from Instagram images

Step 5.

Check your suspicions that the Blue Bluetooth signal light has started flashing rapidly and the white power light is on.

Now configure. The network connection is temporarily unavailable during the process of setting up. Wait patiently. Once the printer has linked with the point of entry, click the next switch.

Step 6.

If you see the “Select home location” screen is displayed, select your status and click Next to continue. Choose a location in the available options. Click next.

Step 7.

When you open” the “Software Establishing List” screen, select the program you’d like to add and then click Next to continue.

If you’re not sure which software you’d like to install, do not fret about it. It is possible to uninstall the software at any time.

Step 8.

Press the next button on the “Permit all installation wizard process” screen.

Step 9.

The software has been configured correctly. In the event that it appears that the “Check Printer device Settings” screen pops up during the setup process, click the Detect switch once more. The search for a printer will begin. This could take several minutes, based on the network configuration.

Step 10.

If you see that the “Wi-FI Configuration” screen is done, look up the model’s name as well as the ID of the WiFi community, and then press through to finish. The “Recommended printhead catastasis” screen will be displayed. Click Next.

Step 11.

Now you are prepared to register the name of the printer. If you’d like to register the printer, click Next. If not then, select Cancel.

Read Also :   What are the steps for connecting a VPN to my router?

To participate in the survey that is expanded to take part, click the I to agree button or switch. If you don’t, click “Disagree.”

Step 12.

If you see the “Rating Print” screen appear and you are able to accept the Canon Pixma IP110 printer test printer, click the Go button. If not, press Next.

If you see the “Installation complete” message appear on the screen, click the Exit button to complete installing. This is it. These are the most common steps that are applicable to this IP110 Canon Pixma configuration.

Related Articles

One Comment

  1. I really loved reading your blog about How to I Connect the Canon Pixma Ip110 Setup. It was very well authored and easy to understand. Unlike additional blogs I have read which are really not good. I also found your posts very interesting. In fact after reading, I had to go show it to my friend and he enjoyed it as well!

Leave a Reply

Your email address will not be published.

Back to top button